🛠️ Slab Hub Assembly Guide
A step-by-step guide to mounting your Slab Hub display
Each Slab Hub display is designed to enhance your card while keeping it secure and beautifully framed.
Inside your package, you will find:
📦 What’s Included
-
1 Handcrafted artwork print
-
3 Plexiglass panels
-
Back panel (solid – no cutout)
-
Middle panel (with card-shaped cutout)
-
Front panel (clear finishing layer)
-
-
4 Metal standoff screws
-
8 Rubber washers (2 per screw — front + back)
-
1 Microfiber cleaning cloth
Important: Before beginning assembly, remove the protective film from both sides of every plexiglass panel.
These films prevent scratches during shipping.
🔧 Assembly Steps
1. Prepare the Back Panel & Place the Artwork
Lay the back plexiglass panel on a clean surface.
Remove the protective films and position your artwork print centered on top.
2. Add the Middle Plexiglass Panel
Place the middle panel with the cutout directly over the artwork.
Make sure all edges are perfectly aligned.
3. Insert Your Card (Using a Perfect Sleeve)
For best fit and protection, insert your card into a perfect sleeve before placing it in the frame.
A perfect sleeve ensures:
-
perfect centering
-
a secure and stable fit
-
extra protection during assembly
-
a smooth finish with no friction on the card
Gently position the sleeved card inside the cutout of the middle panel.
4. Place the Front Panel
Remove the protective films and place the front plexiglass panel on top to close the frame.
5. Add the Screws & Rubber Washers
For every screw:
-
Place one rubber washer in front (between screw head and plexiglass)
-
Place one rubber washer on the back (between screw base and plexiglass)
Insert the screws through all three panels and tighten them lightly.
6. Tighten the Screws Evenly
Do not overtighten.
The plexiglass needs gentle, even pressure for a perfect seal.
7. Clean & Enjoy
Use the included microfiber cloth to polish the front panel and remove fingerprints.
Your Slab Hub display is now ready to showcase your card with style.